26 (40)
6.3
Setting Up Wireless Bolt IoT with REST Commands
Sending REST commands to Wireless Bolt IoT:
1.
Setup Wireless Bolt IoT as an internet router.
Refer to
Setting Up Wireless Bolt IoT as an Internet Router, p. 23
On your PC:
2.
Open a web browser and send a string by entering it in the In the
Address bar
.
In your PLC application:
3.
Send a text string to the
TCP port 80
on the Wireless Bolt IoT Ethernet interface.
For more information, refer to the REST Commands Reference Guide at
Anybus
®
Wireless Bolt IoT
™
User Manual
SCM-1202-139 1.0 en-US