82 (124)
7.12
Use an Existing Configuration
When you have configured a Communicator and want to use the same settings to configure
additional Communicators, do the following.
Procedure
In the built-in web-interface of the Communicator with the configuration you want to use:
1.
On the Files & firmware page, click
Export
→
The configuration is saved in an conf file and downloaded to your PC.
In the built-in web-interface of the new Communicator to be configured:
2.
On the Files & firmware page, click
Import
3.
In the Import configuration window, click
Select file (.conf)
.
4.
In the Open dialog box, browse to and select the configuration file and click
Open
5.
To import the configuration file, click
Import
.
Result
All the configuration settings are imported.
To apply the settings, click
Apply
in the web-interface header, and follow the instructions.
Anybus
®
Communicator
™
User Manual
SCM-1202-162 1.1 en-US