115 (124)
12.2
Reset to Factory Settings
Before You Begin
Factory reset will reset any on site made configuration changes and set the Communicator to the
same state as leaving HMS production.
If the Firmware has been updated, factory reset will revert the Communicator configuration to
initial state after the update.
Procedure
To reset the Communicator:
1.
Disconnect the Communicator from power.
2.
Use a pointed object, such as a ballpoint pen to press and hold the
reset
button.
Anybus
®
Communicator
™
User Manual
SCM-1202-162 1.1 en-US
