StaffCall IQ Pager
Page
1
of
4
800-321-6221
Battery Replacement
Instructions
Tools: Phillips Head Screwdriver & Blue Opener Tool
Step 1
Place the pager on a table and then flip it over so that the display is facing down. After, remove the four screws at each
of the four corners of the pager and place them in a safe location.
Step 2
On the top of the pager, by the digital number, use the opener tool to pry the top and bottom of the pager apart. Then
slide the opener tool along both sides to dislodge the top of the pager from the bottom.
Step 3
Once you have the top of the pager removed, undo the two screws above the display to detach the circuit board.
