Components
•
JTECH gateway
•
Guest locators
•
Guest locator charger
•
Table tags
EasyVu Guest Location
Quick Setup Guide
Step 1
Step 2
Step 3
Plug in the guest locator charger.
Charge the guest locators for a
minimum of 4 hours.
*Do not stack more than 15 high.
Position the Gateway & Router in
a dry, central location away from
metal.
Connect antennas to both the
gateway & Router. Plug in each
device in the . Connect the
Gateway and Router together with
included ethernet cable.
Follow this order:
1. Plug in Router first and wait
for all lights to come on
2.Plug in the gateway next
3.Only then do you proceed to
step 4
Mount and plug in the Tablet.
Go to Wi-Fi to confirm connection
to the TP-Link_xxxx SSID
Pin on label under Router
***
Do not connect the Tablet to
your local internet connection. It
must be connected to our TP-Link
For technical support, please contact JTECH at 800.321.6221.
©2021 JTECH, an HME Company logo and product names are registered trademarks of HM Electronics, Inc. All rights reserved.
PM18002-1
Step 4
If the programs do not automatically:
Launch after turning on the tablet
Launch:
EasyVu Server 1st
and EasyVu Client 2nd
Step 6
Test the system at every table by
placing any guest locator on each
table tag.
Confirm that the table #/name
shows up on the EasyVu Client
screen (tablet).
Stick the tags to the tables.
System is ready to use!
•
TP-Link Router
•
Windows Tablet
Place the Gateway & Router in a dry, central location away from metal & heat.
Do Not connect the Router to your local internet connection
Plug in each device in the exact order below:
1.
Plug in Router first and
wait for all lights to come on
-1 minute
2.
Connect the Gateway and Router together with included
ethernet cable
3.
Plug in the gateway next
Only then do you proceed to step 3
ALTERNATE SET UP!
If
NOT
using the Router
(Wired connection only):
After Plug in the gateway, Connect
the Gateway to the Tablet using the
mini-USB cable provided.
Step 5
Place the table tags on their
designated tables.
Only stick them
down after you have completed the
testing in step 6.
