14
Beltpac Operating Mode Setup
Set up beltpacs to operate in the desired mode by pressing and holding the button combinations shown below . Button
combinations work in unison with the
PWR
(power) button .
Mode
Button Combination
Button Functions
Head Coach (default)
Hold X + O + ALL and press
PWR
X, O & ALL have normal
functions
NOTE:
Beltpacs and all-in-one headsets are shipped in the Head Coach mode
Offense only
Hold O and press
PWR
X & O work as O
ALL has no function
O ALL
Hold O + ALL and press
PWR
X & O work as O
ALL has normal function
Defense only
Hold X and press
PWR
X & O work as X
ALL has no function
D ALL
Hold X + ALL and press
PWR
X & O work as X
ALL has normal function
O Defense only
Hold X + O and press
PWR
X & O have normal functions
ALL has no function
Latching (Hands-Free, Full-Duplex)
Hold ALL +
and press
PWR
X & O will latch on when
pressed and released, for a
normal two-way conversation
Push-To-Talk (PTT)
Hold ALL +
and press
PWR
X, O & ALL must be pressed
and held while you talk, and
released to listen
NOTE:
Mode settings will be stored to memory, so your beltpacs will have the same mode
settings each time you power them off and on .
NOTE:
ALL
does not latch on, and must be held down to hear both
O
and
X
.
