User Guide | Arcadia® Central Station
5.21
Logic Page
The Arcadia Central Station offers six fully configurable GPIOs, increasing the range and
possible uses of controls and relays.
l
2 x GPIs. These can be used, for example, to allow the station operator to open an audio
route to a Channel using a foot switch, or to route a program feed to a Channel, Group or
beltpack when an on-air light comes on.
l
Up to 10 different audio routes can be generated on each GPI.
l
4 x GPOs. The most common uses for output relays are to turn on an on-air light, connect
to a radio, or send an input to an external audio console.
l
Up to 10 different actions can be generated on each GPO.
l
You can also set up extended control sequences in the
Control Logic
section.
Relays (GPOs) and GPIs are configured in the
Configuration > Logic
page of the Core
Configuration Manager (CCM) and can be viewed and tested on the
Status > Logic
page.
5.22
Setting up GPIOs and Logic Events
5.22.1
Overview
l
2 x GPIs
l
4 x GPOs
l
Unlimited Logic Events
Page 84
Summary of Contents for Clear-Com ARCADIA Series
