HME 6700HD, Installation Instructions Manual

Page: 47 / 68

SY
S6700 BRIDGE INTERF
A
CE
40
6.8 Installer Settings
6.8.1 Authentication Required
Password
Input the installer password, and the press the
“Continue” button to gain access to the Installer
Settings.
6.8.2 Controller
Learn Devices
This setting is used to Learn all the devices in the 6700
system, Bases, Routers and Consoles. Select “Learn” to
begin the process.
System Logs
Clicking the Delete button will clear all the Bridge’s logs.
Select this option following a successful install and test to clear the logs, so any future errors
are properly recorded during store operation.
6.8.3 Store Setup
Max Order Points
Set the maximum amount of Order Points that each particular store is using. By default, this
setting will automatically populate with the maximum amount of Order Points possible once
all the Routers have been learned. One Router = 16 Order Points; two routers = 32 Order
Points, etc.
6.8.4 POS
Port
Set the correct port used by the POS system. By default, the port should be set to 8020
unless otherwise specified by the POS requirements for a particular store.
6.8.5 Base Discovery
Network Scan & Broadcast
This setting allows you to set the speed at which the “CIB Application” scans the network to
discover bases connected to the 6700 network.
● Off = No scan for any devices.
● Normal = Two IP addresses scanned every 5 seconds.
● Fast = 10 Network IP addresses scanned every 5 seconds.
It is recommended that this setting be set to Normal.
6.8.6 Defaults
System Restore
This setting allows the Bridge to be restored to the default settings. In some cases where the
Bridge is not performing correctly, it may be necessary to select this option. Once selected, all
custom programming for the Bridge will be lost.
In order for the Bridge to operate after System Restore, it is required that the Bridge be
manually programmed. Please be certain that Bridge programing is fully understood before
using this option.
NOTE:
An administrator password is required to access this setting.
Sections
1 2 3 4 5 6 7 8 9 10 11 12