75
R26
79
HEY THERE!
JUST CHARGE IT
WE’RE HERE TO HELP. CONTACT US!
HX-P430
USER GUIDE AND
WARRANTY INFORMATION
You’ve got questions? We’ve got answers.
Contact a Consumer Relations representative by
phone or email to help answer any questions.
Please be sure to have the model number of your
product available. (Hint: It’s HX-P430)
Register your speaker! Information about where
you bought it and how you’re using it is like
gold for the people who make these speakers.
To register, visit:
USA:
www.jamaudio.com/customer-support/product-registration
CAN:
http://canada.jamaudio.com/product-registration
Charging the speaker is so easy you’ve probably figured it out by now, but just in case, you’ve got two options: you can charge it
using your computer or a wall outlet. The XT needs about 3 hours for up to 8 hours of party time.
The LED lights on your speaker let
you know what it’s doing.
1. The cord that came with the speaker — the
one with the USB on one end and the micro
USB on the other — will work with your
computer.
2. If you want to use the wall outlet, you’ll need
to pick up a power cord with a micro USB the
next time you’re at the store, or use any USB AC
adapter, including the one for your cell phone.
SHED SOME LIGHT
BLUETOOTH
®
CONNECTION — IT’S A SETUP
Like any amazing couple, this one starts with a connection — one
between your device and the speaker’s
Bluetooth
. Here’s how it works:
1. Make sure the smartphone, tablet, or computer you’re using with the
speaker has
Bluetooth
.
2. Turn on the speaker (press and hold the power button for 5 seconds)
and look for the little blinking light.
3. Do whatever your device needs you to do on its end.
4. Look for JAM XT in your device’s
Bluetooth
list or click YES.
USA
[email protected]
1.888.802.0040
8:30am–7:00pm EST M–F
[email protected]
1.888.225.7378
8:30am–5:00pm EST M–F
CANADA
5. Now hit PLAY on your speaker and crank it up — or down if
you’re lame.
The device and
Bluetooth
will find each other every time, as long as
the speaker is set to
Bluetooth
and your device’s
Bluetooth
is, you
know, on.
If you’re connecting to a computer, you may have some extra steps
on that end. You’ll have to get that information from the computer
company.
Depending on your device, you may be prompted to enter a pairing
code. If prompted, enter “0000” as the code.
Note: If you turn on your XT but haven’t started the party yet, it will
automatically power off after 2 minutes of unpaired inactivity.
Note: Once you've paired, if you pause the party for 15 minutes or
more, the JAM XT will automatically shut off to preserve battery
power.
Thank you for purchasing
the
JAM XT
. Check out
the sections below for all
the important information
about your new speaker.
Pairing Mode
Bluetooth
Light
Battery Light
Connected
Charging
Ready to Party
Aux-In Mode
Low Battery
Continued on page 2.
AC adaptor not included.
or
3h
CHARGE
CONTROL YOUR DESTINY ... OR AT LEAST YOUR SPEAKER
10
1. Check out how much juice is in the battery
2. This is the microphone
3. Turn the music up or down
4. Push it to play, push it again to pause
5. Lets you know when
Bluetooth
is paired
6. This is the power button
7. The power cord goes here
8. Here’s where you hook it up old-school
9. Toggle between languages here
10. Language selector pin
3
3
5
2
1
4
6
7
8
9
Bluetooth
®
Devices
JAM XT
on
>
5s
Bottom:
