HK Demo SideLED Quick Manual Download Page 1

Demo SideLED

HK 16400046_Quick Guide_Demo-SideLED_EN_V01

Quick Guide Demo SideLED

Note: USB power supply with min. 850mA required, connection via USB cable – Micro B

Plug in USB power supply

1. All LEDs are activated for a short time
2. The device will then enter an “idle state” (no standby)
3. Only the company logos are illuminated.

Start by pressing the ON / OFF key

1. The illumination of some keys is activated. ON / OFF lights up green.
2. Press again for activating the demo mode, key lights up white.
3. Holding the key will put the device into “idle state” 

*) If the ON / OFF key is operated from the right side of the keypad, there is a chance that turning off to    
standby mode does not work properly as the palm of the hand is detected by the proximity sensor. 

Reviews: