3 ) When the battery voltage is lower than 9.6V, the robot will stop
working. Charge it on time; otherwise, it may damage due to over-
discharge.
1.3
Operation
1 ) Whatever the finished product or the unassembled parts package,
the SD memory card has a download system image.
2 ) When the robot is working, keep the robot away from your eyes to
avoid accidental injury.
3 ) When the robot is working, do not put your fingers in the working
range of the robot joints to prevent accidental injury.
4 ) Please put the robot on the smooth ground when you are using it,
otherwise, it may fall and damage some electronic components.
5 ) After the robot is on, please do not twist the joints, because it will
damage robot joint.
6 ) The servo of the robot includes various precise components. It needs
to be replaced after a long time or excessive use.
7 ) Long press the Raspberry Pi extension board KEY2 button can turn
off the Raspberry Pi when the bug occurs, but please avoid turning off the
power supply to shut down the Raspberry Pi
1.4
Control and Connection
1 ) The user of the finished product can use the mobile phone APP to
directly control after turning on the Raspberry Pi.
2 ) Mobile phone control support and Apple and Android systems, Apple
system version needs 9.0, or later, Android system version requires 5.0 or
later, please ensure that GPS positioning is turned on before using.
3 ) The robot supports the PS2 handle control (the robot product does not
contain the PS2 handle, and it needs to purchase separately).
4 ) Support Wi-Fi connection, Wired, Wi-Fi LAN mode.
5 ) If the camera screen is not clear, please rotate it to adjust the focal
length.
2.
Mobile APP Control
2.1.
Mobile APP Installation
Scan the QR code below or find the "WonderPi" installation package file
(Android version only) in this folder. After downloading the apk file on
your mobile phone, click it to install(Android system version needs 5.0 or
later, iOS system version 9.0 or later).