C21UE102-2110
76
3.6.5.
I/O Module with 32CH Digital Inputs (optional)
Description:
The following figure shows the pin assignment of the I/O module with 32ch digital inputs.
Table 3-10 Digital input expansion model signal data
Signal
Description
F.G
Frame Ground
GND
Power supply: Ground 0V
+Vs
Power supply: +24V
DC
IN
EtherCAT signal input
OUT
EtherCAT signal output
Figure 3-14 Digital input expansion model (32CH) dimensions and pin definition
Digital INPUT can be an NPN or PNP, adjusted by DI COM, supplied by an external power supply.
(
COM→24V: NPN
/
COM→0V: PNP
)
The number of expansion modules and the number of I/O channels can be changed flexibly, so the
DI/DO number on the device and the DI/DO number on the software interface will be different.
Summary of Contents for RC4
