Hivertec motionCAT HCPCI-MNT720M, User Manual

Page: 82 / 168

71
3.7 I Module HM-DI320C
The I module is a DI (Digital Input) module with 32 input points.
3.7.1 Specifications
Category Item Specifications Remarks
Basic
specification
ASIC for Motionnet control G9002
by Nippon Pulse
Motor
DI
specifications
Input count 32 points
Input method Photocoupler-isolated input (TLP280-4 or equivalent)
Rated input voltage DC +12V to DC +24V
Working input
voltage range
DC +10V to DC +26V
Rated input current 8mA (For 24V input voltage)
Input resistance 4.28k

Response time 1ms or less (Fixed by 1ms H/W filter)
Input
count/Common
count
8 points/1 common
Safety feature Overcurrent protection
A PTC thermistor (poly switch) cuts the current when the current flowing through
its external power supply connector terminal exceeds a certain amount.
Environment
requirements
Power supply DC +12V to DC +24V
Consumption current
Model no.
Consumption
current of the
communication
board 24V terminal
HMG-I1 560mA
HMG-I2 700mA
Temperature requirement 0 to 50 degrees Celsius without dew condensation
Module dimensions
(Excluding the connector’s
projecting part)
Module: Depth 85mm × Height 105mm
Outer dimensions of the frame: Depth 110mm × Height 115mm × Width 14.2mm
Table 3.7-1 I module, HM-DI320C specifications
3.7.2 External Appearance
Figure 3.7-1 External appearance of I module, HM-DI320C
DI32 connector (J1)
Internal logic circuit POW ON indicator (Green)
(ON by in5V logic circuit POW ON)
POW ON indicator (Green) of each of
EXTPOW0 to 3 on the module board
(ON by power supply and normal fuse
at each EXTPOW)