Hitron CGNVM User Manual Download Page 47

Page: 47 / 128

STATUS

Hitron CGNVM User’s Guide

2.6

The Status: DOCSIS Event Screen

Use this screen to view information about local WAN activity events.

Click

Status

DOCSIS Event

. The following screen displays.

Uncorrectables

This displays the number of blocks received that
required correction due to corruption, but were unable to
be connected.

Reset FEC Counters

Click this to return the Forward Error Connection (FEC)
columns (

Correcteds

and

Uncorrectables

Upstream Overview

NOTE:

The upstream signal is the signal transmitted from the CGNVM.

Port ID

This displays the ID number of the upstream
connection’s port.

Frequency (Hz)

This displays the actual frequency in Hertz (Hz) of each
upstream data channel to which the CGNVM is
connected.

Modulation

This displays the type of modulation that each upstream
channel uses.

SNR (dB)

This displays the Signal to Noise Ratio (SNR) of each
upstream data channel to which the CGNVM is
connected, in dB (decibels).

Channel ID

This displays the ID number of each channel on which
the upstream signal is transmitted.

Bandwidth

This displays the maximum available bandwidth on the
relevant channel.

Table 10:

The Status: DOCSIS WAN Screen (continued)

Summary of Contents for CGNVM































































































































Search results

Summary of Contents for CGNVM

Reviews:

Brands by name

Popular brands

Hitron CGNVM, User Manual

Search results

Summary of Contents for CGNVM

Reviews:

Brands by name

Popular brands