Hitron CGNVM User Manual Download Page 43

Page: 43 / 128

STATUS

Hitron CGNVM User’s Guide

2.4

The Status: DOCSIS Provisioning Screen

This screen displays the steps successfully taken to connect to the Internet over the

Cable

connection.

Use this screen for troubleshooting purposes to ensure that the CGNVM has
successfully connected to the Internet; if an error has occurred you can identify the
stage at which the failure occurred.Click

Status

DOCSIS Provisioning

. The

following screen displays.

Click

Status

DOCSIS Provisioning

. The following screen displays.

WAN Sending

This displays the amount of data transmitted over the
WAN connection since the device was last started.

Private LAN IP Address

This displays the CGNVM’s LAN subnet’s IP
information.

LAN Receiving

This displays the amount of data received over the LAN
connection since the device was last started.

LAN Sending

This displays the amount of data transmitted over the
LAN connection since the device was last started.

WAN Up Time

This displays the amount of time that has elapsed since
the CGNVM’s Wide Area Network connection was last
restarted.

Table 9:

The Status: System Information Screen (continued)

Summary of Contents for CGNVM































































































































Search results

Summary of Contents for CGNVM

Reviews:

Brands by name

Popular brands

Hitron CGNVM, User Manual

Search results

Summary of Contents for CGNVM

Reviews:

Brands by name

Popular brands