Hitron CGNVM User Manual Download Page 15

Page: 15 / 128

INTRODUCTION

Hitron CGNVM User’s Guide

1.1.1

Key Features

The CGNVM provides:



DOCSIS/EuroDOCSIS 3.0 compliance and DOCSIS 3.0 certification.



Two USB 2.0 hosts, supporting Network Attached Storage (NAS) functionality.



WiFi 2.4GHz 802.11n and 5GHz 802.11ac dual-band MIMO internal antennas.



16 wireless Service Set IDentifiers (SSIDS); 8 SSIDs per radio.



Individual configuration for each SSID, including security, bridging, routing,

firewall and WiFi parameters.



Integrated DLNA media server with support for video, audio and image serving.



Well-defined LEDs that clearly display device and network status.



Enhanced management and stability for low total cost of ownership.



2 FXS ports for telephony using SIP or MGCP.



MoCA 2.0 connectivity for highest performance.



Full operator control via configuration file and SNMP



TR-069 and HNAP ready for easy setup and remote management

1.2

Hardware Connections

This section describes the CGNVM’s physical ports and buttons.

Summary of Contents for CGNVM































































































































Search results

Summary of Contents for CGNVM

Reviews:

Brands by name

Popular brands

Hitron CGNVM, User Manual

Search results

Summary of Contents for CGNVM

Reviews:

Brands by name

Popular brands