Hitron CGNM User Manual Download Page 90

Page: 90 / 124

ADMIN

Hitron CGNM-2250 User’s Guide

Figure 35:

The Admin: Remote Management Screen

The following table describes the labels in this screen.

Table 30:

The Admin: Remote Management Screen

Remote Management

Protocol

Use this field to enable/disable remote control protocols

and ports on CGNM.



HyperText Transfer Protocol (

HTTP

)



HyperText Transfer Protocol Secure (

HTTPS

)



Telnet

ON/OFF

Use this field to enable/disable each protocol.

Port

Use this field to specify which port to use with each

protocol.

Remote IP Range

Remote Range Allow

All

This function allows you to grant access to a certain

range of IP addresses or all IP addresses.

IP Start

Use this field to enter the start IP.

IP End

Use this field to enter the end IP.

Action

Use this field to

Delete

a port forwarding rule. The deleted

rule’s information cannot be retrieved.

Save Changes

Click this to save your changes to the fields in this

screen.

Summary of Contents for CGNM


























































































































Search results

Summary of Contents for CGNM

Reviews:

Related manuals for CGNM

Brands by name

Popular brands

Hitron CGNM, User Manual

Search results

Summary of Contents for CGNM

Reviews:

Related manuals for CGNM

Brands by name

Popular brands