Hitron CGNM User Manual Download Page 59

Page: 59 / 124

BASIC

Hitron CGNM-2250 User’s Guide

4.3

The Gateway Function Screen

Use this screen to configure gateway function. You can turn port triggering on or off
and configure new and existing port triggering rules.

Click

Basic

Gateway Function

. The following screen displays.

Figure 21:

The Basic: Gateway Function Screen

The following table describes the labels in this screen.

Status

This displays Active when a device is connected.

Renew

Click this to obtain the connected device’s information

again.

Table 17:

The Basic: Gateway Function Screen

Residential Gateway

Function

Use this field to turn gateway function on or off.



Select

Enabled

to turn gateway function on.



Select

Disabled

to turn gateway function off.

UPNP

Use this field to turn UPNP on or off.



Select

Enabled

to turn UPNP on.



Select

Disabled

to turn UPNP off.

Save Changes

Click this to save your changes to the fields in this screen.

Help

Click this to see information about the fields in this screen.

Table 16:

The Basic: LAN Setup Screen (continued)

Summary of Contents for CGNM


























































































































Search results

Summary of Contents for CGNM

Reviews:

Related manuals for CGNM

Brands by name

Popular brands

Hitron CGNM, User Manual

Search results

Summary of Contents for CGNM

Reviews:

Related manuals for CGNM

Brands by name

Popular brands