HITROL HPV-20N Series Instruction Manual Download Page 14

Page: 14 / 15

HTM(HPV)-20N Series

HITROL CO., LTD.

Safety and
Environment

Marking

Weather-proof Version

Ex-proof Version

■ Precautions for Use

- Make sure to connect the product and vessel using required tools for sure.

- Keep the lock key safe and make sure that it is locked.

- Do not apply high impact to the product.

■ Precautions for Wiring

- Make sure to wire contacts correctly.

- Internal ground (inside product housing) and external ground shall be connected.

- Wire and supply the power to the product after checking the specifications.

- Incorrect power voltage may cause damage to the product.

- Pay attention to prevent electric shock.

■ Disposal of Product

- Make sure to separate the amplifier and main unit from housing before disposing

the products. Also, the amplifier shall be detached and discard the metal and non-

metallic materials. No part (ex. Mercury switch) has influence on the environment, so

no special attention is required.

■ Product Identification

- The product identification mark is attached onto the housing and shows the model name,

serial number, working temperature, working pressure, and matters regarding output. The serial

number is a unique manufacturing number for the identification of products.

Summary of Contents for HPV-20N Series
















Search results

Summary of Contents for HPV-20N Series

Reviews:

Related manuals for HPV-20N Series

Brands by name

Popular brands

HITROL HPV-20N Series, Instruction Manual

Search results

Summary of Contents for HPV-20N Series

Reviews:

Related manuals for HPV-20N Series

Brands by name

Popular brands