HM-90S Series
HITROL CO., LTD.
8
Do not insulate the housing and cooling fin.
Installation
- Default connection is a side type.
- According to the dimensions of the drawing, the connection and main unit shall be leveled.
Also, it is recommended to install a bracket to support the product if necessary.
- When installing, the nozzle length shall be checked before installing the product.
- If the temperature of object to be measured exceeds 350℃, an ex-proof product (HM-
90S(H)-Ex) is not applicable.
-
If the temperature of object to be measured exceeds 120℃, use a high-temperature
product (HM-90SH, HM-90SH-Ex) and insulate the main unit and connection, as
shown below.
Vessel
HM-90S
