HiTi Digital P530D, User Manual

Page: 21 / 248

◎
Failure Symptoms
When detecting a failure symptom, check the printer by the following table.
Symptom Action
Power is not switch on
●
Please check if the power cable is firmly
connected
The personal computer does not
recognize the printer
Check if the USB cable is connected to the
personal computer or printer
The printer does not ready
●
Check if the front cover is properly closed
●
Check if paper is jammed in the printer
●
When the paper setting lamp goes off, please
rotating the paper flanges manually to stretch
proper length of paper through the gap of the
rear paper rack until the sensor lights.
The front cover does not open
●
Check if the printer is installed in a flat surface
●
Please check if there is hindrance for opening
the front door
A straight stripe area is not
printed
●
The Thermal Printing Head may be dirty.
Please contact HiTi dealers for cleaning the
thermal head.
Dotted areas are not printed
●
The roller may be dirty. Clean the roller as
described in Chapter 6. “Routine Maintenance”
◎
Paper jam solution
For safety consideration, please switch off the power firstly and follow the below instructions
to remove jammed paper.
Front Paper jam
E
n
g
lis
h
E
n
g
lis
h
7.1
Open the front cover
20