Hitecsa EQU-PF 2100, Installation, User And Maintenance Manual

Page: 50 / 61

ENCLOSED DOCUMENTS
52
A1 TECHNICAL DATA
Table “A”: Technical Data
EQU-PF Model 233 238 245 250 260 265
Nominal cooling capacity (*) kW 32,5 38,8 44,2 51,3 59,2 64,0
E.E.R. (3
rd
step, 100%) 2,36 2,93 2.46 2,29 2,37 2,38
E.E.R. (3rd step, 100%) EN 14511 05/11 (250kPa residual) 2,95 3,65 2,90 3,06 3,05 3,01
E.S.E.E.R. 3,07 3,81 3,08 2,86 2.96 2,97
E.S.E.E.R. + 3,44 4,25 3,57 3,30 3,41 3,48
E.S.E.E.R EN 14511 05/11 (250kPa residual) 5,35 6,02 5,59 5,14 5,33 5,36
E.S.E.E.R + EN 14511 05/11 (250kPa residual) 5,99 6,72 6,48 5,94 6,13 6,28
Sound power level (3
rd
step, 100%) (***) dB(A) 82 82 83 85 85 85
Scroll/step compressor n° 2/2 2/2 2/3 2/3 2/3 2/3
Circuits n° 1 1 1 1 1 1
Fans n° x kW 1x2.08 1x2.08 1x2.10 2x2.15 2x2.23 2x2.23
Fan nominal air flow m³/h 13000 13000 13000 26000 26000 26000
Fan maximum available static head Pa 250 250 250 250 250 250
Water side heat exchanger water content l 3,20 3,20 3,80 4,40 5,10 5,70
Water side heat exchanger nominal flow (*) m³/h 5581 6674 7600 8800 10200 11000
Water side heat exchanger nominal pressure drops (*) kPa 27,6 56,0 32,0 32,0 33,0 31,0
P1 residual head (*) kPa 134 130 122 114 102 92
P2 residual head (*) kPa 231 227 195 190 184 167
ASP1 residual head (*) kPa 107 87 113 103 88 75
ASP2 residual head (*) kPa 202 184 186 179 163 150
Water tank content (ASP1/ASP2) l 150 150 150 150 150 150
Amount of R410A refrigerant See serial number plate
Amount of Polyester oil See compressor plate
Electrical data 233 238 245 250 260 265
Absorbed power (*)
(■)
kW 13,8 13,2 17,9 22,4 25,0 26,9
Pump absorbed power (P1/ASP1) / (P2/ASP2) kW 0,70/1,5 0,70/1,5 0,70/1,5 0,70/1,5 0,70/1,5 0,70/1,5
Electrical power supply V-ph-Hz 400
– 3+N – 50
Auxiliary power supply V-ph-Hz 230
– 1+N – 50
Control power supply V-ph-Hz 24
– 1 – 50
Nominal current (■)
A 21,8 25,4 25,1 31,9 37,0 41,3
Maximum current (■)
A 27,8 31,4 36,7 45,7 50,4 55,2
Starting current (■)
A 117 117 132 152 218 224
Pump absorbed current (P1/ASP1) / (P2/ASP2) A 2,2/3,5 2,2/3,5 5,1/8,6 5,1/8,6 5,1/8,6 5,1/8,6
Dimensions 233 238 245 250 260 265
Width (a) mm 870 870 870 870 870 870
Height (b) mm 1920 1920 1920 1920 1920 1920
Depth (c) mm 2650 2650 2650 2650 2650 2650
Heat exchanger inlet/outlet connections Ø 1-
1/4”
1-
1/4”
1-
1/4”
1-1/4
”
1-
1/4”
1-
1/4”
DS/RC100 inlet/outlet connections Ø 1-
1/4”
1-
1/4”
1-
1/4”
1-
1/4”
1-
1/4”
1-
1/4”
(*) In the following conditions: Condenser inlet
air temperature 35°C; chilled water temperature
7°C; temperature differential at evaporator 5°C.
(***) Sound power level in dB(A) on the basis of
measurements taken in accordance with RS
6/C/005-2009 and UNI EN-ISO 9614/1. The
noise data refers to the units without the pump.
(■)
Pumps excluded.
Note:
The E.E.R. and C.O.P calculation does not
consider the absorption of the pumps.
The EER, ESEER and COP calculations
according to EN 14511 05/11 (250kPa residual)
refer to the versions without pumps.
The starting current reduces by 25% with the
SFS accessory
The machine decreases its noise below the
nominal value indicated in the table when the
outdoor air temperature is below 35°C and
condensation control is present.
If the INS accessory is present, the sound
power Lw decreases by 2 dB(A).