29
IOM ACHA-ACHBA_201a1201_208000_180901_EN
ACHA / ACHBA
PACKAGED COMPACT
HORIZONTAL AIR - AIR
OPERATION
pGD1 or Mini PGD THERMOSTAT
–
Time schedule
Example: From Monday to Thursday the num1 program activates, which starts up the machine
at 6:30 and stops it at 11:00, starts again from 11:30 to 13:30 and from 15:00 to 19:00. Out of
these hours the machine will start if the established limits are exceeded (in cooling mode from
above, under in heating mode)
E.
Forced:
In the display of the type of start-
up press the key “Prg” during few seconds. To deactivate this function you must press the
On-Off key to stop the unit and press it again to leave the unit in the type of start-up selected previously.
This option starts the machine during an established time in hours when you have selected the time schedule and for example you
are out of the schedule. When the forced time finishes the system returns to the type of start-up prior to the forced.
Time schedule (HITSAA01)
Clock adjust
1. Press
Prog
key
2. Select C. Clock /Schedule menu
3. Modify Day, Date and hour
Enable or disable DST (Daylight Saving Time)
By default, commonly stablished for CEE: last Sunday of March adjust clock from 02:00 a.m. to 03:00 a.m. and the last Sunday of October
readjust clock from 03:00 a.m. to 02:00 a.m.
Example:
DST of 60 min. Enabled from the first Monday of
February at 10:00 (goes off at 11:00) until the last
Sunday of October at 3:00 goes back at 2:00.
