27
IOM_UMXCBA-UMXCA_801.1a4502.2_208027_200201_EN
UMXCBA/UMXCA
CONDENSER UNITS WITH
COMPRESSOR AND AXIAL FAN
OPERATION
pGD1 or Mini PGD THERMOSTAT
–
Time schedule
E.
Forced:
In the display of the type of start-
up press the key “Prg” during few seconds. To deactivate this
function you must press the On-Off key to stop the unit and press it again to leave the unit in the type of
start-up selected previously.
This option starts the machine during an established time in hours when you have selected the time
schedule and for example you are out of the schedule. When the forced time finishes the system returns to
the type of start-up prior to the forced.
-
Clock set when the pGD1 is an option (HITSAA01)
1. Press the
Prog
key
2. Select the C. Clock /Schedule menu
3. Modify Day, Date and hour
Enable or disable DST (Daylight Saving Time)
By default, commonly established for the EC: last Sunday of March adjust clock from 02:00 a.m. to 03:00
a.m. and the last Sunday of October readjust clock from 03:00 a.m. to 02:00 a.m.
Example:
DST of 60 min. Enabled from the first Monday
of February at 10:00 (goes off at 11:00) until
the last Sunday of October at 3:00 goes back
at 2:00.
-
The pGD1 is an option (HITSAA01)
Various types and possible setting options are available:
A. Setting for each day of the week except public holiday.Two Setpoint values SET1 (cool) and SET2
(heat) that will be defined in the final screen.
Example:
Start-up on Monday at 8:00 with setpoints SET1 and SET2 for Cool and Heat
respectively until 14:00 and operation again from 15:00 until 20:00.
B. Schedule for up to 3 holiday periods.
Enter the date of start and end of period
together with the setpoints if it is ON or OFF.
Example:
Period from 25/12 to 31/12 in cold and heat
operation with SET1 and SET2 setpoints.
From 1/8 to 31/8 SET1 setpoint Cool only.
C. Schedule for single holiday days, up to 6 different days.
Enter the holiday day date and the
setpoints, OFF when it will be Off.
Example:
Day 1/05 in cold and heat operation with the
same SET1 setpoint.
D. Configuration of the two SET1 and SET2 setpoints
Enter the values for the two setpoints (SET1
and SET2) that you have been using when
setting the programmation.
Example: SET1=20°C and SET2=22°C