Hitec Luxembourg S.A. |
5, Rue de l’Église, L-1458 Luxembourg
www.hitec.lu | [email protected] | Tel.: (+352) 49 84 78 - 1 | Fax. (+352) 401303
File Name: HTCA_003-DADS-UserManual.docx
Document Type: End User Manual | Version date: 01/05/2010 | Last Printed: 15/02/2011
Page 32/81
Different
graph modes
exist, to be able to work with the graph.
The
Zoom
Button allows scaling the graph
by selection a part of the graph with the
mouse.
The operator can
move
the graph by selecting the
Pan
Button is selected.
The
cursors
of the graph window can be moved in case the
Cursor
button is
selected.
When you click on the
Slope
button, the Slope window appears. In this window, you
can move both cursors and select one of two curves. If you click accept, the result will
be written in the comment field.
In case a graph is displayed the operator can choose a part of the graph with the
cursors
and
recalculate
the polynomial curve. This is done with the
Recalc
button. A new polynomial curve in dark red is drawn then.
The recalculated graph can also be printed out, by clicking the
button on the main window, or selecting the File/Print menu.
Figure 5
– Slope option
Terminal Section
On the left side the Terminal section of the main window gives some information about the
status of the DADS terminal
. The same message than on the terminal is displayed. This
can be useful, as some operations have to be done on the terminal and messages are
displayed on this one. Like this the operator can still see them, even if the terminal is
installed more far away.
On the right side the current temperature is shown. This function is only available on DADS
terminal higher than version 2.0.
