27
PICTURE SELECT
This function enables you to select the picture quality of a tape.
•
This selection
must be done during playback.
1 Insert a tape into VCR
Begin playback.
2 Select main menu
Press the MENU button until the main menu appears.
MENU
TIMER PROGRAMMING
AUTO REPEAT [OFF]
→
PICTURE SELECT
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
3 Select "PICTURE SELECT"
Press the PLAY/
or STOP/
button to point to "PICTURE SELECT".
4 Select your desired mode
Press the F.FWD/
button until your desired mode (NORMAL, SOFT or SHARP) appears on the TV
screen..
• Once you select the Picture Select mode, it stays in effect even after you turn off the VCR.
• To stop playback, press the STOP button.
Power failure:
If there is a power failure for more than 30 seconds, Picture Select will go to NORMAL.
INDEX SEARCH
This feature provides a method of indexing a recordings starting point so that it can be easily returned to in
either fast forward or rewind mode.
• The index mark will be made automatically when the REC button is pressed. It will also be marked at the
starting point of Timer recording and IRT.
• The index mark will not be recorded if the PAUSE button on the remote control is pressed and released
during recording.
• The time gap between making the index marks on the tape should be greater than 1 minute for SP
recording, 2 minutes for LP recording and 3 minutes for SLP recording.
Example:
You are watching program number 4 and want to fast forward to program number 7. You must
skip three programs.
1 Select "INDEX SEARCH"
Press the INDEX SEARCH button on the remote control.
2 Enter your desired number
Press the PLAY/
or STOP/
button until the number of programs that you want to skip appears.
(Example: "03" for 3 programs)
INDEX SEARCH
03
•
The Index Search mode will be cancelled if the procedures are not activated in 30 seconds.
3 Begin Index Search
Press the REW or F.FWD button. The VCR begins rewinding or fast forwarding to the beginning of desired
program.
NOTE:
Every time an index signal is skipped, the number in the program indicator decreases by one.
4 After Index Search
When the preset program is reached, the VCR will start playback automatically.
Summary of Contents for VT-MX4510
Page 20: ...20 ...
