Hitachi VT-MX4510, Owner'S Manual

Page: 17 / 43

17
CLOCK SET UP
Set the clock accurately for proper automatic timer recording. We suggest that you use a TV or radio station as your
time source.
In the example below, the clock is to be set to:
DATE March 20th, 2000
SETTING TIME 5:40PM
• Use the remote control for this procedure.
• When the VCR in the Menu mode, the following buttons only work (PLAY/ , F.FWD/ , REW/ STOP/ ,
RESET/EXIT, POWER and MENU).
• Be sure to check that the "PWR." and the "VCR" indicators are both on.
• Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the back of the VCR to match the
channel selected on the TV.
1 Select "CLOCK SET"
Press the MENU button. The CLOCK SET menu appears.
CLOCK SET
MONTH DAY YEAR
03 ----
HOUR MINUTE AM/PM
-- : -- --
• The number buttons on the remote control do not work in this Menu mode.
• When you press the F.FWD/ button during steps [2] to [6], you may move forward to the next step.
• Press the REW/ button to go back one step from the current step during steps [3] to [7].
2 Select the month
Press the PLAY/ or STOP/ button repeatedly until the desired month appears.
(Example: March - 03)
Then, the press F.FWD/ button.
CLOCK SET
MONTH DAY YEAR
03/ -- ----
HOUR MINUTE AM/PM
-- : -- --
3 Select the day
Press the PLAY/ or STOP/ button until the desired day appears. (Example: 20th
→
20)
Then, press the F.FWD/ button.
CLOCK SET
MONTH DAY YEAR
03/01 ----
HOUR MINUTE AM/PM
-- : -- --