TIMER RECORDING
53
TIMER RECORDING
AUTOMATIC TIMER RECORDING
You may set the VCR to start and end a recording while you are away. You can set
seven programs to record on specific days, daily or weekly within a 1 year period.
In the example below, the timer is being set to record:
DATE:
May
6th,
1999
SETTING TIME:
from 7:30PM to 8:30PM
CHANNEL:
CH16
TAPE
SPEED:
SP
PROGRAM NO:
No. 1
• Please refer to the connection you are using, through pages 10, 11, or 12 on
"ANTENNA/CABLE CONNECTIONS: before continuing.
•
Use the remote control for this procedure.
• Be sure to check that the POWER and the VCR/TV indicators are both on to program
it.
• Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the
back of the VCR to match the channel selected on the TV.
• Clock must be set to the correct time and date before setting the timer.
• Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or
fast forward the tape to the point at which you want to begin recording.)
Avoid overlap of programs...
There is a case that a program will not be performed.
When programs overlap:
• The program with an earlier start time has priority.
• Once the earlier program finishes, the overlapping programs will begin recording in
sequence.
• The illustration below demonstrates the sequence of
recordings.
1 Select "TIMER PROGRAMMING"
Press the MENU button on the remote control so that TIMER PROGRAMMING menu
Summary of Contents for VT-MX4410A
Page 5: ...CAUTIONS 5 ...
Page 22: ...PREPARATION FOR USE 22 ...
Page 26: ...PREPARATION FOR USE 26 ...
