manualshive.com logo in svg

Hitachi VSP F400, System Administration Manual, Page: 331 / 414

Share
Download
Hitachi VSP F400 System Administration Manual Download Page 331

IscsiTargetInfo.csv

This CSV file contains information about iSCSI target information set to the
channel board port. A record is created for each iSCSI target. Information
about the NAS module is not displayed in this CSV file.

Table 36  IscsiTargetInfo.csv file (Title: <<iSCSI Target Information>>)

Item

Content

Port

Port name

iSCSI Target Alias

iSCSI target alias

iSCSI Target ID

Number of the iSCSI target (00 to fe, hexadecimal)

iSCSI Target Name

Name of the iSCSI target

Host Mode

Host mode set to the iSCSI target (hexadecimal)

Host Mode Option

Host mode option set to the iSCSI target (0 to 127, decimal)

Separated with a semicolon (;) if multiple host mode options are set.

Security Switch

Security switch status set to the iSCSI target port
•

On

•

Off

Authentication | Method

Authentication method settings of the iSCSI target
•

CHAP

•

None

•

Comply with Host Setting

Authentication | Mutual
CHAP

Mutual CHAP authentication function settings of the iSCSI target
•

Enabled

•

Disabled

Authentication | User Name

User name set when iSCSI target was authenticated

Resource Group ID (iSCSI
Target)

Resource group ID of the iSCSI target (0 to 1023)

Resource Group Name (iSCSI
Target)

Resource group name of the iSCSI target

JnlInfo.csv

This CSV file contains information about journals. A record is created for each
journal.

Table 37  JnlInfo.cvs file (Title: <<JNL Information>>)

Item

Content

JNL#

Journal number (in hexadecimal)

Current MPU

Number and name of MP unit currently controlling the journal

(MPU-10, MPU-11, MPU-20, MPU-21)

Setting MPU

Number and name of MP unit configured to control the journal

(MPU-10, MPU-11, MPU-20, MPU-21)

Examples of storage configuration reports

331

System Administrator Guide for VSP Gx00 models and VSP Fx00 models

Summary of Contents for VSP F400































































































































































































































































































































































































































Reviews:

No comments