Hitachi VSP F400 System Administration Manual Download Page 265

Page: 265 / 414

Installing block and file licenses using NAS Manager

Use NAS Manager to install and enable both block and file license keys on

VSP Gx00 models with NAS modules. Using NAS Manager, you can install

both block and file licenses but only remove file licenses. To remove block

licenses, you must use the maintenance utility.

Adding a license key

Adding a license key can enable services or increase the capabilities of your

system. To add a license key:

Procedure

Navigate to

Home > Server Settings > License Keys

Click

add

The following table describes the fields on this page:

Field/Item

Description

Add a File License Key

File License Key

Enables the user to manually enter the license key.

Import File License Keys From a File

File License Key
File Name

Enables the user to import a license key from a file.

Import Block License Keys From a File

(NAS module only)

Block License
Key File Name

Enables the user to import a software application license key from a file.

cancel

Closes the page without saving configuration changes.

Managing license keys

265

System Administrator Guide for VSP Gx00 models and VSP Fx00 models

Summary of Contents for VSP F400































































































































































































































































































































































































































Search results

Summary of Contents for VSP F400

Reviews:

Hitachi VSP F400, System Administration Manual, Page: 265 / 414

Search results

Summary of Contents for VSP F400

Reviews: