Hitachi VSP F400, System Administration Manual

Page: 157 / 414

Adding a user
Procedure
1. In the Device Manager - Storage Navigator Administration tree, select
User Groups .
2. On the User Groups tab, select the user group that has the role you
want the user to have, and then add or remove users.
To add users to the selected groups:
a. Click
Add Users .
b. In the Add Users window, select a user and click Add .
To remove users from the selected groups:
a. In the
Remove Users window, select one or more users.
b. Click More Actions > Remove Users .
3. Click Finish .
4. In the Confirm window, check the settings. If the Task Name field is
empty, enter a task name.
5. Click Apply . The task is now registered. If you selected the Go to tasks
window for status check box, the Task window opens to show the
status of the task.
Enabling or Disabling user accounts
To allow or prevent a user from logging in to Device Manager - Storage
Navigator and NAS Manager, follow the steps below.
Caution: Do not select any user account used to connect to a storage system
that is registered in the Storage Device List window. For details, see the
Hardware Reference Guide for your storage system.
Before you begin
• Log into an account that is different from the user whose account that you
want to enable or disable.
• You must have the Security Administrator (View & Modify) role to perform
this task.
Procedure
1. In the Device Manager - Storage Navigator Administration tree, click
User Groups .
2. On the User Group tab, select the user group.
3. On the Users tab, select a user.
4. Click Edit User .
5. Click the Account Status check box.
• To allow the user to log in to Device Manager - Storage Navigator and
NAS Manager, click Enable .
• To prevent the user from logging in to Device Manager - Storage
Navigator and NAS Manager, click Disable .
User administration 157
System Administrator Guide for VSP Gx00 models and VSP Fx00 models