manualshive.com logo in svg

Hitachi VSP F1500, User Manual

Share
Download
Hitachi VSP F1500 User Manual Download Page 83

Note: 

Using external volumes increases the likelihood of a failure, and

disaster recovery is more complex and challenging. Using multiple external
volumes as pool-VOLs in a pool increases the likelihood of the pool being
blocked.

To minimize the adverse effects of failure, use only one pool per external
storage system. An external pool-VOL that is blocked due to a failure blocks
the pool. You must restore blocked pools.

For more information about external storage systems and disaster recovery
methods for external volumes, see the 

Hitachi Universal Volume Manager

User Guide

.

Simultaneous processing of multiple Thin Image pair tasks

Some Thin Image pair task operations are processed in the background after

the requested task is accepted. The total number of instances of each pair

task that can be simultaneously processed in a storage system is limited by

the number of MP blades (or units) in the storage system.

Note: 

The terms "blade" and "unit" refer to the same hardware on different

VSP storage systems. The term "blade" is used for VSP G1000, G1500, and
VSP F1500, and the term "unit" is used for VSP G200, G400, G600, G800.

For each of the following pair tasks, the number of simultaneous instances
processed in the background is equal to the total number of MP blades (or
units) in the storage system:
• Creating pairs.
• Restoring pairs.
• Deleting snapshot data and deleting pairs.

When you execute additional pair task operations above these limits, the
tasks are processed in the order requested.

Related tasks

•

Creating Thin Image pairs using Device Manager - Storage Navigator

 on

page 130

•

Restoring Thin Image pairs

 on page 141

•

Resynchronizing Thin Image pairs

 on page 144

•

Deleting Thin Image pairs

 on page 146

Pair operations when pairs are cascaded

The following table explains pair operations according to the pair status. The
status of pair B is SMPL.

Thin Image system and planning requirements

83

Hitachi Thin Image User Guide for Hitachi Virtual Storage Platform G Series and F Series

Summary of Contents for VSP F1500







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands