manualshive.com logo in svg

Hitachi VSP F1500, User Manual

Share
Download
Hitachi VSP F1500 User Manual Download Page 185

 

5.

Accept the default task name or enter a unique name.
You can enter up to 32 letters, numbers, and symbols, except the

following:

\ / : , ; * ? " < > |

6.

If you want to monitor the task after submitting it, select 

Go to tasks

window for status

.

7.

Click 

Apply

 to submit the task.

Workflow for recovering blocked pools

When a pool is blocked, you must recover the pool volume, pool, Thin Image

pairs, and then V-VOL in that order. This section describes how to recover a

blocked pool.

Recovering blocked pool volumes

When a pool volume is blocked, contact customer support.

Recovering the pools

Recover the pool by using one or both of the following methods:
• Add additional pool-VOLs.
• Decrease the pool usage rate by deleting the P-VOL's snapshot data.

Recovering Thin Image pairs

When a pool is blocked, all Thin Image pairs that contain snapshot data
of the blocked pool switch to the PSUE status. To recover these pairs,
delete and then re-create them.

Monitoring and maintaining Thin Image

185

Hitachi Thin Image User Guide for Hitachi Virtual Storage Platform G Series and F Series

Summary of Contents for VSP F1500







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands