Getting Started
Getting Started
This section guides you through the initial preparation of the camera/recorder. None of
these processes are complex. Set aside some time, relax, and familiarize yourself with
this quality instrument.
Enjoy getting to know all about your Hitachi 8mm camera/recorder. The more
comfortable and familiar you are with the machine and its features, the more you can
make it do for you. Let's get started!
It is crucial that you read and understand all the safety instructions before you begin. If
you haven't read the safety instructions yet, please take the time to do so now.
Charging the Battery
The first step is to set the battery to charge. It takes approximately an hour, enough time
to familiarize yourself with some of the basic features of the camera/recorder. Once
charged the battery will give you approximately 55 ~ 65 minutes of operating time
depending on the use of ZOOM and Start/Stop.
Charge the battery at a temperature range of 50°F(10°C) - 86°F (30°C) to prevent
damage to the battery.
1. Plug the AC adapter/charger power cord into an AC outlet. Make sure that the wide
blade fits into the wide slot. If it doesn't fit try reversing it. If you still cannot make fit the
blades fully into the outlet either contact an electrician to replace your obsolete outlet, or
use a polarized cord or outlet accessory.
2. To insert the battery into the charger align the reference arrow on the battery with the
reference arrow on the AC adapter/charger. Push the battery till it is flush with the AC
adapter/charger sliding it in the direction of the arrow as shown in the figure.
3. The CHARGE light remains on while the battery charges, turning off when charging
completes.
Note:
Remove the external power adapter from the AC adapter/charger before attempting
to charge the battery. The CHARGE light flashes if the external power adapter remains
connected while you attempt to charge the battery.
Note:
Do not operate the battery at temperature below 14°F (-10°C) or above 95°F (35°C).
At extremely low temperatures operation time decreases, while at high temperature the
battery may be damaged.
After charging set the mark switch to red so that you may quickly identify
