Hitachi VM-E58A Instruction Manual Download Page 61 | Manualshive

Page: 61 / 64

background image

HITACHI WARRANTY CARD (Front)
CANADA ONLY

- 61 -

61

HITACHI

HITACHI WARRANTY CARD (Front)
CANADA ONLY

NOT VALID IN U. S. A.

HITACHI

VIDEO PRODUCTS GOLD CARD WARRANTY

* See inside for the GOLD CARD advantages and how to get it.

HITACHI

EXCEPTIONAL PERFORMANCE

HITACHI (HSC) CANADA INC.

3300 Trans Canada Highway, Pointe Claire, Quebec H9R 1B1

IMPORTANT NOTICE: This warranty will not apply to products purchased outside of Canada
OR sold by any organization other than HITACHI (HSC) CANADA INC.

PROTECTION PLAN CONDITIONS

A - This contract is exclusively for products manufactured and sold by Hitachi (HSC) Canada
Inc., hereinafter called "Hitachi", purchased in Canada from a dealer duly accredited by Hitachi.
The program is available only for products covered by an original validated Hitachi warranty
given at the time of the purchase.
B - Hitachi will make repairs to the product mentioned in this plan, parts and labour charges
included, until the expiry date of this plan.
C - THIS PROTECTION PLAN WILL BE IN FORCE ONLY AFTER EXPIRATION OF THE
NORMAL PURCHASER'S WARRANTY. During the normal warranty the only valid proof
required for servicing the product is the Hitachi GOLD CARD or the bill of purchase. The
Protection Plan Card cannot be used as proof of warranty.
Only after the expiration of the normal warranty, the owner can have the product repaired,
without charge at any authorized Hitachi Service Center upon presentation of the Protection Plan
Card.
D - This Protection Plan is applicable to the product mentioned excluding the accessories such as

«
...
59
60
61
62
63
...
»

Summary of Contents for VM-E58A

































































Reviews:

No comments

Related manuals for VM-E58A

Brand: Samsung Pages: 9

Brand: Samsung Pages: 68

Brand: Samsung Pages: 94

HMX H100 - Camcorder - 1080i

Brand: Samsung Pages: 153

Palmcorder PV-GS85

Brand: Panasonic Pages: 74

Brand: Panasonic Pages: 3

Brand: Panasonic Pages: 48

Brand: Panasonic Pages: 3

Brand: Panasonic Pages: 53

Brand: Panasonic Pages: 50

Brand: Panasonic Pages: 52

Brand: Panasonic Pages: 72

Brand: Panasonic Pages: 64

Brand: Panasonic Pages: 40

Brand: Panasonic Pages: 100

Brand: Panasonic Pages: 36

Brand: Panasonic Pages: 100

Brand: Panasonic Pages: 68

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands