background image

HITACHI WARRANTY CARD (USA Front) 

 

58

HITACHI WARRANTY CARD (USA Front) 

U. S. A. ONLY 
NOT VALID IN CANADA 

HITACHI 

Hitachi Home Electronics (America), Inc. 
Hitachi Sales Corporation of Hawaii, Inc. 

LIMITED WARRANTY 

Hitachi Home Electronics (America), Inc. and Hitachi Sales Corporation of Hawaii 
("Hitachi",) warrants this component in duration as stated below: 

* VIDEO CASSETTE RECORDER 
* CAMCORDER 
* AC ADAPTER CHARGER 

90 DAYS LABOR (Carry-in) 

* 1 YEAR PARTS (Except Battery) 

Conditions of Hitachi Limited Warranty 

Hitachi Video Products are warranted to be free of defects in parts and workmanship at 
the time of purchase by the original owner.  If this product is found to be defective, 
Hitachi will repair or replace defective parts at no charge to the original owner.  Parts 
used for replacement are warranted for the remainder of the original Limited Warranty 
period.  For 90 days from the date of original purchase, Hitachi will provide labor for the 
repair or replacement of defective parts without charge, subject to the following 
conditions: 

1. Owner must provide verification of the date of purchase when requesting Limited 
Warranty Service. (Dated Sales Receipt Required) 
2. All repairs must be performed by a Hitachi Authorized Service Facility. 
For information concerning repairs, operation, technical assistance or for referral to the 
location of your nearest Authorized Service Facility or Parts Distributor, call 1-800-
HITACHI (1-800-448-2244) 

HITACHI HOME ELECTRONICS (AMERICA), INC. 

3890 Steve Reynolds Blvd. 
Norcross, GA 30093 
Tel: 404-279-5600 

Summary of Contents for VM-E310A



































































Reviews: