INSERTING AND REMOVING CASSETTES
20
INSERTING AND REMOVING CASSETTES
A power source must be connected before inserting or removing cassettes. Once connected,
cassettes can be inserted or removed whether the CAM/OFF/VIDEO switch is on or off.
Inserting a cassette
1. Connect the POWER SOURCE. (See pages 10 and 11.)
2. Press
"STOP/EJECT"
. The cassette door will open automatically.
3. Insert the cassette so the transparent window is toward you and the arrow toward the
cassette holder. Slide the cassette into cassette holder as far as it will go.
NOTE:
Push in the center of the cassette all the way until it is latched by the cassette holder.
4. Press the cassette holder. The holder will latch in the operating position.
Removing a cassette
Press
"STOP/EJECT"
. The cassette door will open automatically. Remove the cassette.
