Item
Controller
Drive tray
FMD drive tray: 520/490 or
less
Dense intermix drive tray:
1200/1160 or less
Power consumption (VA/W) CBSS: 520/500 or less
CBSL: 450/430 or less
SFF drive tray: 320/310 or
less
LFF drive tray: 280/260 or
less
FMD drive tray: 440/420 or
less
Dense intermix drive tray:
1000/960 or less
Notes:
1. The power current of Nx2 described in this table is required for a single power
unit.
2. If one power unit fails, another power unit requires electric current for the two
power units. Therefore, plan the power supply facility so that the current-carrying
capacity for one power unit can provide the total capacity for two power units.
3. This table shows the power requirement (100 V or 200 V) for the maximum
configuration . The actual required power might exceed the value shown in the
table when the tolerance is included.
VSP G200 electrical specifications (DC power supply)
Input power specifications
Item
CBSSD
CBSLD
DBSD
DBLD
Rated input
voltage (v)
DC -60 to -48
Input voltage
fluctuation (v)
DC -72 to -40
Input voltage
instant
fluctuation (v)
DC -75 to -36
VSP G200 electrical specifications (DC power supply)
Appendix B: Electrical specifications for VSP G200
Hitachi Virtual Storage Platform G200 Hardware Reference Guide
86