Hitachi Virtual Storage Platform F400, System Administrator Manual

Page: 87 / 368

Role Capabilities
Storage Administrator
(Provisioning)
■
Configuring caches
■
Configuring volumes, pools, and virtual volumes
■
Formatting and shredding volumes
■
Configuring external volumes
■
Configuring Dynamic Provisioning
■
Configuring host groups, paths, and WWN
■
Configuring Volume Migration except splitting Volume Migration pairs
when using CCI
■
Configuring access attributes for volumes
■
Configuring LUN security
■
Creating and deleting quorum disk used with global-active device
■
Creating and deleting global-active device pairs
Storage Administrator
(Performance
Management)
■
Configuring monitoring
■
Starting and stopping monitoring
Storage Administrator
(Local Copy)
■
Performing pair operations for local copy
■
Configuring environmental settings for local copy
■
Splitting Volume Migration pairs when using CCI
Storage Administrator
(Remote Copy)
■
Remote copy operations in general
■
Operating global-active device pairs (except for creation and deletion)
Support Personnel
(Vendor Only)
Configuring the SVP
■
Normally, this role is for service representatives.
Support Personnel
(User)
■
Viewing storage system status
■
Installing OS security patches
■
Updating operating systems
■
Performing basic maintenance
Built-in groups, roles, and resource groups
You can assign users to one or more built-in user groups and custom user groups. You
cannot change roles or resource groups set to the built-in groups, but you can create
custom user groups according to the needs of your storage environment.
For more information about resource groups, see the
Provisioning Guide .
The following table shows all the built-in groups, and their built-in roles and resource
groups.
Built-in groups, roles, and resource groups
Chapter 4: User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 87