■
The console has established a remote desktop connection with the SVP.
■
The management utility window is displayed on the console.
On the management console that is connected to the SVP:
Procedure
1.
On the Windows 7 desktop, click
Start
>
Control Panel
.
2.
Click
Clock, Language, and Region.
3.
Click
Date and Time.
4.
Click
Change date and time.
The Date and Time Settings window opens.
5.
Set the date and time, then click
OK
to save the settings and close the window.
Enabling IPv6 communication
You can use IPv6 to set communication between the management client and the SVP.
You should assign the SVP the same type of IP addresses (IPv4 or IPv6) that are used on
the storage system. You must also
configure
the client computers with the same IP
version that you assign to the SVP. In addition, use the same communication options for
both the management client and the SVP.
If you use IPv6 to display the Device Manager - Storage Navigator main window when
both IPv4 and IPv6 are available, IPv6 addresses are displayed in the Device Manager -
Storage Navigator secondary window but IPv4 communication is actually used.
The following topics provide brief instructions on
configuring
IPv6 communication.
Note:
If the SVP uses IPv6, you must
configure
management clients to use
IPv6 for communication. Consult your operating system's documentation for
instructions.
Changing network communication settings
This procedure explains how to
configure
a management client to use IPv6 for
communication with an SVP.
Procedure
1.
In the maintenance utility, click
Administration
to expand the
Administration
navigation pane.
2.
Click
Network Settings
.
The
Network Settings
window displays the current network settings and
permissions.
3.
In the
Network Settings
window, click
Set Up Network Settings
.
The
Network Settings
dialog box displays the current settings for the Mac address,
IPv4 and IPv6 settings, and the network connection mode for both controllers 1 and
2. It also displays the current settings for the maintenance port and the storage
system internal network.
4.
Change the settings as needed and click
Apply
.
The dialog box closes and returns you to the
Network Settings
window.
Enabling IPv6 communication
Chapter 3:
Configuring
the storage system
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
49
Summary of Contents for Virtual Storage Platform F400
Page 18: ......
Page 362: ...Glossary System Administrator Guide for VSP Gx00 models and VSP Fx00 models 362 ...
Page 367: ......
