Hitachi Virtual Storage Platform F400, System Administrator Manual, Page: 270 / 368

Item Description
Resource Group ID (Host
Group)
Resource group ID of a host group (0 to 1,023, decimal)
Resource Group Name
(Host Group)
Resource group name of a host group
T10 PI Mode Indicates whether the T10 PI mode can be applied to the port for which the
LU path is defined.
■
Enabled
■
Disabled
■
Blank if "Package Type" is not 16FC2 (CHB) or 32FC4R (CHB).
T10 PI Information about the T10 PI attribute which is set for the LDEV number of
the LU path definition.
■
Enabled
■
Disabled
■
Blank if LDEV# is blank
Asymmetric Access State Asymmetric access status (output only for an open system CHA that is
Fibre or FCoE)
Indicates the asymmetric access status:
■
Active/Optimized: Prioritized
■
Active/Non-Optimized: Lower priority
Blank if "Package Type" is iSCSI
LunPortInfo.csv
This CSV file contains information about LU path definition. A record is created for each
port.
For details of LU path
definition, see the Provisioning Guide .
Table 42 LunPortInfo.csv file (Title: <<LUN Port Information>>)
Item Content
Port Port name.
Security Switch The setting status of the security switch:
■
On
■
Off
■
Blank if "Package Type" is NAS module
LunPortInfo.csv
Appendix A: Examples of storage configuration reports
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 270