Item
Description
iSCSI Target Name
Name of the iSCSI target
Resource Group Name
Resource Group Name where the host group belongs
Resource Group ID
Resource Group ID where the host group belongs
Number of LUNs
The number of LU paths
defined
to the host group
Number of LDEVs
The number of logical volumes that are accessible from the hosts in the
host group
Number of PGs
The number of parity groups with logical volumes that are accessible from
the hosts in the host group
Number of DKBs
The number of disk boards controlling the parity groups where the logical
volumes that are accessible from the hosts in the host group belong
Total LDEV Capacity (MB) Total capacity of the logical volumes accessible from the hosts in the host
group. This is the total capacity of LDEVs referred to in "Number of LDEVs".
Port Security
Security of the port
Authentication : Method iSCSI target method authentication settings
■
CHAP
■
None
■
Comply with Host Setting
Authentication : Mutual
CHAP
Enable or disable the iSCSI target mutual CHAP
■
Enabled
■
Disabled
Authentication : User
Name
Authenticated iSCSI target user name
Authentication : Number
of Users
The number of authenticated users registered in the iSCSI target
Host Mode
Host mode of the host group
Host Mode Option
Host mode option of the host group. Host mode options are separated by
semicolons (;) when more than one option is
specified.
Number of Hosts
The number of the hosts in the host group.
Hosts report
The following
figure
shows an example of a hosts report. The table following the
figure
describes the items in the report. When a host is registered to more than one port, more
than one record shows information about the same host.
Hosts report
Appendix A: Examples of storage
configuration
reports
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
210
Summary of Contents for Virtual Storage Platform F400
Page 18: ......
Page 362: ...Glossary System Administrator Guide for VSP Gx00 models and VSP Fx00 models 362 ...
Page 367: ......