Hitachi Virtual Storage Platform F400, Service Manual

Page: 301 / 418

6. Connect new PCIe cables to the PCIe module on the CBLH and to the
PCIe cable connector of the host port expansion chassis connected to the
CBLH. Check that cable latch clicks and that the cables are connected
securely.
Restoring a PCIe module
Procedure
1. At the Replace PCIe Channel Board window, click Restore .
2. When the completion message appears, click Close .
3. Click the PECBs tab and confirm that the status of the new PCIe module
is
Normal
. If necessary, click Refresh at the top-right of the window to
update the status of the window.
4. Log out and close the Maintenance Utility window.
Replacing a PCIe cable 301
Service Guide for VSP Gx00 and VSP Fx00 Models