Hitachi SJ-DN, Instruction Manual

Page: 32 / 36

APPENDIX PARAMETER OBJECT LISTS
28
Function Inst Attr Size Monitoring/Setting Range
Magnifi-
cation
Access
rule
Com
mand
Freq CovertScale (Param185) 1 186 2 0.1 to 99.9 10 Get/Set b086
Stop Key enable (Param186) 1 187 1 00(Invalid)/01(Valid) 1 Get/Set b087
FRS Cancel Sel (Param187) 1 188 1 00(0Hz start)/01(Synchronize start) 1 Get/Set b088
BRD Using Rate (Param188) 1 190 2 0.0 to 100.0(%) 10 Get/Set b090
Stop Mode Select (Param189) 1 191 1 00(Deceleration)/01( Free run) 1 Get/Set b091
CoolingFunContrl (Param190) 1 192 1 00
（
Always ON)/01(ON During Run) 1 Get/Set b092
BRD Mode Select (Param191) 1 195 1
00(Invalid)/01(Invalid during stop)/
02(Valid)
1 Get/Set b095
BRD ON Level (Param192) 1 196 2 330 to 380(V)/660 to 760(V) 1 Get/Set b096
Thermistor Sel (Param193) 1 198 1
00(Invalid)/01(PTC Enable)/
02(NTC Enable)
1 Get/Set b098
ThermistorErrLvl (Param194) 1 199 2 0 to 9999(
Ω
) 1 Get/Set b099
Support service
Service name Code
Get_Attribute_Single H’0E
Set_Attribute_Single H’10
(4) Extend Group B object Class ID=104
Function Inst Attr Size Monitoring/Setting Range
Magnifi-
cation
Access
rule
Com-
mand
Free V/f Freq 1(Param195) 1 100 2 0 to 400(Hz) 1 Get/Set b100
Free V/f Volt 1(Param196) 1 101 2 0.0 to 800.0(V) 10 Get/Set b101
Free V/f Freq 2 (Param197) 1 102 2 0 to 400(Hz) 1 Get/Set b102
Free V/f Volt 2 (Param198) 1 103 2 0.0 to 800.0(V) 10 Get/Set b103
Free V/f Freq 3(Param199) 1 104 2 0 to 400(Hz) 1 Get/Set b104
Free V/f Volt 3 (Param200) 1 105 2 0.0 to 800.0(V) 10 Get/Set b105
Free V/f Freq 4(Param201) 1 106 2 0 to 400(Hz) 1 Get/Set b106
Free V/f Volt 4 (Param202) 1 107 2 0.0 to 800.0(V) 10 Get/Set b107
Free V/f Freq 5 (Param203) 1 108 2 0 to 400(Hz) 1 Get/Set b108
Free V/f Volt 5 (Param204) 1 109 2 0.0 to 800.0(V) 10 Get/Set b109
Free V/f Freq 6(Param205) 1 110 2 0 to 400(Hz) 1 Get/Set b110
Free V/f Volt 6 (Param206) 1 111 2 0.0 to 800.0(V) 10 Get/Set b111
Free V/f Freq 7 (Param207) 1 112 2 0 to 400(Hz) 1 Get/Set b112
Free V/f Volt 7 (Param208) 1 113 2 0.0 to 800.0(V) 10 Get/Set b113
BrakeControlMode (Param209) 1 120 1 00(Invalid)/01(Valid) 1 Get/Set b120
Brake Start Wait (Param210) 1 121 2 0.00 to 5.00(s) 100 Get/Set b121
Brake Accel Wait (Param211) 1 122 2 0.00 to 5.00(s) 100 Get/Set b122
Brake Stop Wait (Param212) 1 123 2 0.00 to 5.00(s) 100 Get/Set b123
BrakeConformWait (Param213) 1 124 2 0.00 to 5.00(s) 100 Get/Set b124
Releasing Freq (Param214) 1 125 2 0.00 to 400.00(Hz) 100 Get/Set b125
ReleasingCurrent (Param215) 1 126 2 0 to 200(%) (constant current) 1 Get/Set b126
Support service
Service name Code
Get_Attribute_Single H’0E
Set_Attribute_Single H’10
(5) Extend Group C object Class ID=105
Function Inst Attr Size Monitoring/Setting Range
Magnifi-
cation
Access
rule
Com
mand
Digital Input 1 (Param216) 1 101 1
01(RV)/02(CF1)/03(CF2)/04(CF3)/
05(CF4)/06(JG)/07(DB)/08(SET)/
09(2CH)/11(FRS)/12(EXT)/
13(USP)/14(CS)/15(SFT)/16(AT)/
17(SET3)/18(RS)/20(STA)/
21(STP)/22(F/R)/23(PID)/
24(PIDC)/26(CAS)/27(UP)/
28(DWN)/29(UDC)/31(OPE)/
32(SF1)/33(SF2)/34(SF3)/35(SF4)/
36(SF5)/37(SF6)/38(SF7)/
39(OLR)/40(TL)/41(TRQ1)/
42(TRQ2)/43(PPI)/44(BOK)/
45(ORT)/46(LAC)/47(PCLR)/
48(STAT)/255(NO)
1 Get/Set C001
Digital Input 2 (Param217) 1 102 1 Same above 1 Get/Set C002
Digital Input 3 (Param218) 1 103 1 Same above 1 Get/Set C003