Installing Your Array
3–9
Hitachi Simple Modular Storage 100 User’s Guide
Optional Items
An Ethernet switch and Ethernet cable are required to use your Hitachi
Simple Modular Storage 100 in a switch (fabric) topology.
•
Installing the Hitachi Simple Modular Storage 100
Installing your Hitachi Simple Modular Storage 100 involves the following
steps:
1. Installing your Hitachi Simple Modular Storage 100 on a table or shelf or
in a rack. See the sections below.
2. Attaching the front panel bezel. See page
.
3. Connecting to the 10/100 Ethernet management ports. See page
.
4. Connecting to the iSCSI Gigabit Ethernet Data Ports. See page
5. Connecting power. See page
Installing on a Table or Shelf
If installing your Hitachi Simple Modular Storage 100 on a table or shelf:
• Place your Hitachi Simple Modular Storage 100 near an AC power
source.
• Allow enough ventilation space between your Hitachi Simple Modular
Storage 100 and other objects in the vicinity.
• Be sure the air vents on the front and back of the your Hitachi Simple
Modular Storage 100 enclosure are not blocked.
Rack-Mounting the Hitachi Simple Modular Storage 100
Your Hitachi Simple Modular Storage 100 can be mounted in a standard 19-
inch rack. The rack-mount and/or rail kit hardware must be carefully
selected to support the equipment properly. Follow the instructions in the
documentation for the rack and/or rail kit. For more information, please
contact your place of purchase.
The following procedure provides general guidelines to follow when
installing your Hitachi Simple Modular Storage 100 in a rack.
•
WARNING! Three or more persons are required to lift your Hitachi
Simple Modular Storage 100. Grasp the enclosure from the bottom
and lift with both hands. To prevent injury, keep your back straight
and lift with your legs, not your back.
WARNING! Three or more persons are required to lift your Hitachi
Simple Modular Storage 100. Grasp the enclosure from the bottom
and lift with both hands. To prevent injury, keep your back straight
and lift with your legs, not your back.
DANGER!
Before mount your Hitachi Simple Modular Storage 100 in a
rack, be sure the rack is secure and is in no danger of falling over.
Summary of Contents for Simple Modular Storage 100
