Hitachi Simple Modular Storage 100 User Manual Download

Page: 38 / 100

3–4

Installing Your Array

Hitachi Simple Modular Storage 100 User’s Guide

Rack-Mount Considerations

The following additional considerations must be observed for rack

installations (see Figure 2 4):
• Your Hitachi Simple Modular Storage 100 can be mounted in a standard

19-inch rack. The rack-mounting hardware must be carefully selected

to properly support the equipment. Follow the instructions in the

documentation for the rack.

• The operating ambient temperature of rack-mounted equipment must

not exceed the maximum rated ambient temperature indicated in this

guide (refer user to Appendix A for more information).

• The air flow clearances specified in this guide must be maintained

within the rack.

• The AC supply circuit for rack-mounted equipment must be capable of

supplying the total current specified on all the labels of the rack-

mounted equipment.

• All AC power supply connections must be properly earthed. To ensure

the integrity of the earth connection, special attention must be given to

connections that are not directly connected to the branch circuit (for

example, power strips).

Server Considerations

• Your Hitachi Simple Modular Storage 100 supports a variety of client

operating systems (see

Supported Host Operating Systems on page 1-

• Be sure your server has an installed iSCSI HBA or NIC with the latest

HDS-supported Basic Input Output System (BIOS). For the latest HDS-

supported iSCSI HBAs and NICs, please refer to Hitachi Feature and

Interoperability Reports at

https://extranet.hds.com/http://

hifirerw.hds.com/HiFire/GuestRegister.jsp

• Follow the directions for your iSCSI HBA or NIC to install the card and

its appropriate driver(s). Install any required updates, such as service

packs, hot fixes, or patches, and reboot the server when the installation

is complete.

• Be sure your server is using an HDS-supported iSCSI initiator and

driver. For a list of HDS-supported iSCSI initiators and HBAs, please

refer to Hitachi Feature and Interoperability Reports at

https://

extranet.hds.com/http://hifirerw.hds.com/HiFire/GuestRegister.jsp

Summary of Contents for Simple Modular Storage 100





































































































Search results

Summary of Contents for Simple Modular Storage 100

Reviews:

Related manuals for Simple Modular Storage 100

Brands by name

Popular brands

Hitachi Simple Modular Storage 100, User Manual

Search results

Summary of Contents for Simple Modular Storage 100

Reviews:

Related manuals for Simple Modular Storage 100

Brands by name

Popular brands