Hitachi SAMURAI CLG2, Manual, Page: 50 / 118

Controller Adjustment
Technical Catalogue
TCGB0051 rev 0 - 09/2009
50
SWITCH POSITION
ON
OFF
ON
ON
OFF
OFF

High Cut Check (Fan Stop for Checking)
(NOT AVAILABLE)

Chilled Water Temperature Setting
(STANDARD: “+07”)

Defrosting Set by Ambient Temperature (Heat Pump)
(NOT AVAILABLE)

Continuous Capacity Control Setting
(STANDARD)

Compressor starting Delay Time (STANDARD: 3
min) High Cut Check Setting (Stop Fan Selection:
NOT AVAILABLE.)

Mode Set Switch A
(DEPEND ON MODEL)

Manual Defrost (Heat Pump)
(NOT AVAILABLE)

Optional Function B
(STANDARD: ALL OFF)

Optional Function C
(STANDARD: ALL OFF)

Mode Set Switch B

Local/Remote Changeover Switch
(STANDARD: “Local”)

Cool/Heat Changeover Switch
(STANDARD: “Cool”)

Current Limitation
(Not Available)

Neutral Zone Setting
(STANDARD: “3”)

Hot Water Temperature Setting for Heat Pump
(NOT AVAILABLE)

Optional Function A (Outernals signals, Self-
Checking mode)
(STANDARD: ALL OFF)

Pump Operation
(STANDARD: OFF)
LED
PUSH
BUTTON
SWITCH
7 SEGMENTS
Cool
Heat
Local
Remote
8.1. PCB Drawing