8 AIR FLOW DIRECTION
8.1 RECOMMENDED AIR FLOW DIRECTION SETTING
2 Step
1 Step
3 Step
4 Step
5 Step
6 Step 7 Step
LCD Indication
Auto Swing
Model
COOL, FAN and DRY
HEAT
RPK-(0.4-1.0)FSN(H)4M
Step 3
Step 7
RPK-(1.5-4.0)FSN(H)4M
Step 3
8.2 ADJUSTING VERTICAL DEFLECTOR
The vertical deflector can adjust with moving by hand as shown
in the figures blow.
Vertical deflector
Louver
!
C A U T I O N
Do not move the louver by hand. If moved, the louver mechanism will be
damaged and the air flow direction may not be set.
Louver
8.3 AUTOMATIC SETTING OF LOUVER
The swing louver is stopped and moved by controlling the remote control switch.
When “Stop” switch is pressed from the remote control switch, the swing louver will be closed automatically and the operation is
stopped.
9 EMERGENCY OPERATION
9.1 FUNCTION
The emergency operation switch is used when the batteries for
wireless remote control switch are shortage.
?
N O T E
The operation is as follows.
•
Automatic cooling/heating operation
•
Setting temperature: 25ºC
•
Fan speed: HIGH
•
Louver angle: horizontal
RPK-(0.4-1.5)FSN(H)4M: Press the temporary switch
(ii)
RPK-(2.0-4.0)FSN4M: Press the temporary switch with a non-
metallic tool,etc
(iii)
The emergency operation is stopped when the temporary switch
is pressed again.
?
N O T E
Do not press the switch by metal sticks such as pen, pin, etc. It may cause
failure.
AIR FLOW DIRECTION
PMML0498 rev.1 - 11/2018 - P5417093
6
