3. Servicing
Electrical components
SMGB0082 rev.1 - 07/2015
110
3.6.12 Main Switch
To remove the main switch, follow the next steps
1
Turn the switch of in order to be able to open the E box
door
2
Open the E-box door.
3
Remove the wiring. Unscrew the nuts from the terminals
with a 13 mm spanker.
4
Remove the 4 screws with a flat screwdriver.
5
When reassembling, proceed in the reverse order than
removing.
T
MIT/L3
R
MIR/L1
S
MIS/L2
4 flat screws
MIT/L3
3.6.13 Capacitors
1
Disconnect all the wires connected to the capacitors
(CB1~4). The wires have polar characters. Identify the
wire mark and the indication on the capacitor when
reconnecting the wiring.
2
Loosen the 4 nut that fix the capacitor and remove the
capacitor.
Nuts
CB2
CB4
CB1
CB3
