7 Servicing
RCI-(1.0-6.0)FSR - 4-way cassette
SMGB0137 rev.0 - 05/2021
188
7.1.9
Removing float switch
1
Remove the drain pan according to the item
2
Remove the insulation which attaches the wires for float switch and drain-up mechanism together.
3
Cut the plastic band fixing the wires at the fixing plate for float switch.
4
Removing Float Switch. The float switch is attached next to the drain-up mechanism. Remove the float switch by
loosening the fixing screw for the fixing base.
?
N O T E
• When reassembling, wrap up the wires for float switch and drain-up mechanism together by the insulation. Fix securely them to the
original position. When attaching the drain pan again, pay attention not to pull the wires strongly. Otherwise, the insulation attaching
at the cabinet may be peeled.
• Pay attention to handle the float switch. If it is dropped to a floor, the malfunction may occur.
• When attaching the float switch, tighten the screw by hand. (Do not use a motor-driven screwdriver).
Float switch
Nut
Fixing plate
for float switch
Plastic band
Lead wires
Screw for
fixing plate
